2008, 07-07 Permit App: 08002434 Wheelchair RampProject Number: 08002434 Inv: 1
Application
THIS IS NOT A PERMIT
Penalties will be assessed for commencing work without a permit
Date: 7/7/2008 Page 1 of 2
Project Information:
Permit Use: WHEELCHAIR RAMP
Setbacks: Front
Left: Right: Rear:
Site Information:
Plat Key: 002761 Name: VERADALE PARK ADD
Contact: DENNSTAEDT SERVICES LLC
Address: 533 PATTERSON ST
C - S - Z: CHENEY, WA 9904
Phone: (509) 999-8312
Group Name:
Project Name:
District: East
Parcel Number: 45141.0120
SiteAddress: 812 N RAVALLI DR
Location:: CSV
Zoning: R-2
Water District:
Area: .00 Acres
Block:
Lot:
Owner: Name: COUTTS, WARREN
Address: 812 N RAVALLI DR
VERADALE, WA 99037-9502
SF Res Suburban District
Hold: ❑
Width: 100 Depth: 114 Right Of Way (ft): 50
Nbr of Bldgs: 0 Nbr of Dwellings: 1
Review Information:
Review
Building Plan Review
Released By:
Originally Released: 7/3/2008 By: tmelbourn
Landuse/Zoning/HE Conditions
Permits:
Released By:
Operator: JD
Originally Released: 6/30/2008 By: LBARLOW
Printed By: JD
Print Date: 7/7/2008
Project Number: 08002434 Inv: 1
Application
THIS IS NOT A PERMIT
Penalties will be assessed for commencing work without a permit
Date: 7/7/2008 Page 2 of 2
Building Permit
Contractor: DENNSTAEDT SERVICES LLC Firm: DENNSTAEDT SERVICES LLC
Address: 533 PATTERSON ST Phone: (509) 999-8312
CHENEY WA 99004
This Application: Total Project:
Description Grp Type Notes Sq Ft Valuation Sq Ft Valuation
DECK OPEN R-3 VB RAMP 0 $1,250.00 0 $1,250.00
Item Description
RESIDENTIAL PERMIT FEE
WSBC SURCHARGE
SF PLNS RVW < 7999 SQ FT
Payment Summary:
Permit Type
Building Permit
Totals: 0 $1,250.00 0 $1,250.00
Units Unit Desc
1 SELECT
1 SELECT
1 SELECT
Permit Total Fees:
Fee Amount
$69.25
$4.50
$27.70
$101.45
Fee Amount Invoice Amount Amount Paid Amount Owing
$101.45 $101.45 $0.00 $101.45
$101.45 $101.45 $0.00 $101.45
Disclaimer:
Submittal of this application certifies the owner (or person(s) authorized by the owner) has both examined and finds the information
contained within to be true and correct, and agrees that all provisions of laws and/or regulations governing this type of work will be
complied with. Subsequent issuance of a permit shall not be construed to be a permit for, or an approval of, any violation of any of
the provisions of the code or of any other state or local laws or ordinances.
Signature:
Operator: JD Printed By: JD
Print Date: 7/7/2008
Spokane
Community Development
Residential Construction
Permit Application
Permit Center
11703 E Sprague Ave, Suite B-3
Spokane Valley, WA 99206
(509)688-0036 FAX: (509)688-0037
www.spokanevallev.org
PERMIT NUMBER: 8-- 2 f ��
PERMIT FEE:
New Construction (l Accessory Bldg
n Addition/Remodel
❑ Other:
Deck
SITE ADDRESS:
w, Dr
S� O�c�✓t P
ASSESSORS PARCEL NO: LEGAL DESCRIPTION:
Building Owner:
♦ill�tivv1 R/a. a.vaaaravvv•
DIMENSIONS:
# OF STORIES:
Name: v + CUv.,....i..k
MAIN FLOOR TO SQ.
FTG:
2"" FLOOR SQ. FTG:
Address: (a 1(_ J zC vim' (r
Dr -
FINISHED BASEMENT
SQ. FTG:
City: _Sp e Kc. i e \/a il.� vState:
��
Zip:
Phone: Svc. _ `A 2`i - c.:,S c1 I Fax:
CONSTRUCTION TYPE:
HEAT SOURCE:
Contact Person
Name:
Phone:
Describe the scope
IZes/c
Contractor:
♦ill�tivv1 R/a. a.vaaaravvv•
DIMENSIONS:
# OF STORIES:
JJ
Name: DE,,,, S ed) [ se,r,;(.s LIS
MAIN FLOOR TO SQ.
FTG:
2"" FLOOR SQ. FTG:
Address: S 3 3 ?i_4},,,,,,, S)
IMPERVIOUS SURFACE
AREA:
FINISHED BASEMENT
SQ. FTG:
City: State:
Zip: r(�y
30% SLOPES ON
PROPERTY:
Phone:Fax:
S'c_- `p9- 83i2
CONSTRUCTION TYPE:
HEAT SOURCE:
Contractor Lic No: Di -it mis- < 5,33E Date:
7� s-_.6) 7
City Business Lic. No:
of workin detail:Cost of Project:
d .
! c' Pyr/ POS,
Q (—
IZS CJS
amici Pec %7 res r-/._
Proposed Use:
•(write N/A if not applicable)**********************
""..-.-".... _. ___" "---- -1LLG 1V11V
HEIGHT TO PEAK:
♦ill�tivv1 R/a. a.vaaaravvv•
DIMENSIONS:
# OF STORIES:
TOTAL HABITABLE SPACE:
MAIN FLOOR TO SQ.
FTG:
2"" FLOOR SQ. FTG:
UNFIN BASEMENT SQ. FTG:
-'
IMPERVIOUS SURFACE
AREA:
FINISHED BASEMENT
SQ. FTG:
GARAGE SQ. FTG:
DECK/COV. PATIO SQ. FTG:
30% SLOPES ON
PROPERTY:
# OF BEDROOMS:
CONSTRUCTION TYPE:
HEAT SOURCE:
SEWER OR SEPTIC?
The permitee verifies, acknowledges and agrees by their signature that: 1) If this permit is for construction of or on a dwelling, the
dwelling is/will be served by potable water. 2) Ownership of this City of Spokane Valley Permit inure to the property owner. 3) The
signatory is the property owner or has permission to represent the property owner in this transaction. 4) All construction is to be done
in full compliance with the City of Spokane Valley Development Code. Referenced codes are available for review at the City of
Spokane Valley Permit Center. 5) This City of Spokane Valley Permit is not a permit or approval for any violation of federal, state or
local laws, codes or ordinances. 6) Plans or additional information may be required to be submitted, and subsequently approved before
this application can be processed.
i
SIGNATURE_
Method of Payment:
0 Cash
Bankcard #:
Authorized Signature:
REVISED 2/15/07
❑ Check
DATE: a S`-
❑ Mastercard 0 VISA
Expires: VIN#:
CITY ane 11703 E Sprague Ave Suite B-3• Spokane Valley WA 99206
S♦509.688.0036 ♦ Fax: 509.688.0037 •
Va11ey
Completed Building and Mechanical Application with: Accurate address, Parcel
Number and/or Legal Description, description of work, owner and contractor
information, signature and date.
Three (3) sets of plans including Site Plan, elevations, floor plans, foundation plans
with details, roof plan, framing plans and details.
❑X Show the height of any proposed buildings or accessory structures.
❑X Floor plan for each floor: Dimension to scale(minimum 1/8") and label each room
(including sq footage of house and garage on plans) show each level of existing
house and square footage of any additions.
El
Egress windows: Provide at least one window or exterior door approved for
emergency escape or rescue from basement and in every room for sleeping.
Floor framing details: Joist type, size, spacing and installation details.
Roof framing plan and details
❑X Furnace and hot water heater location
�X All header locations: type, size and connections
❑X Foundation plan
❑X Insulation information
❑X Decks and Stairway details
All braced wall panel types: show locations and details of installation, including
engineered design
Smoke detector locations
22" x 30" attic access location
18" x 24" crawl space access
One-hour separation detail: between house and garage
do.' valley
Site Address: 812 N RAVALLI DR
Parcel Number: 45141.0120
Zoning: R-2
Fire District: FD 01
Project
Transmittal
City of Spokane Valley
Community Development
Department
11703 E. Sprague Ave, Suite B3
Spokane Valley, WA 99206
Phone: 509.688.0036
Water District:
New project 0
Previous pre -app meeting 0
Plan revisions ❑
Transmittal Date:
Wednesday, June 25, 2008
Project Number: 08002434
Applicant:
e-mail:
Contact:
e-mail:
Contractor:
DENNSTAEDT SERVICES LLC
533 PATTERSON ST
CHENEY, WA 9904
(509) 999-8312
DENNSTAEDT SERVICES LLC
533 PATTERSON ST
CHENEY. WA 9904
(509) 999-8312
DENNSTAEDT SERVICES LLC
533 PATTERSON ST
CHENEY WA 99004
(509) 999-8312
Owner: COUTTS, WARREN
812 N RAVALLI DR
VERADALE, WA 99037-9502
e-mail:
Occupant:
e-mail:
Arch / Engineer:
e-mail:
- . JUN 2 5 2008
l,ll}
Project
Description: WHEELCHAIR RAMP
Building
Landuse
Engineer
Utilities
Health
Fire Dist
Assessor
APPLICATIO
n
SITE PLA
PLAN
S
Please send all plan review and project comments via e-mail to the
highlighted individuals.
Spokane
Valley®
For City Use Only
PLUS Project Number
Project Address
11703 E Sprague Ave Suite B-3 ♦ Spokane Valley WA 99206
509.688.0036 ♦ Fax: 509.688.0037 ♦ permitcenter@spokanevalley.org
As part of our on-going commitment to customer service during the review process of your project
application, we are providing you with a TARGET DATE for the initial technical application review. If for
any reason we cannot meet this date, we will contact you with a revised target date.
Your application review TARGET DATE is
The TARGET DATE is the date we estimate your project application will have had its initial technical
review. It is not the date for approval or permit issuance.
Tips for a Smoother Project Application Review
➢ Submit complete, accurate plans and documents.
Extra time may be required for re -submittals as project application reviewers work on multiple applications and it
may be several days before they can look at your new or revised information.
➢ Designate a specific contact person to communicate with the City.
While the person designated as the applicant's contact person with the City can be changed, one individual with the
expertise for dealing with reviewer comments would be the best choice for the entire review process.
➢ Call staff regarding the status of your project only after the target date shown at the top of the page.
Although you should be contacted on or by the target date, please feel free to contact us if you haven't heard from us
by your target date. Staff may contact you before the target date if the initial review is complete. By following this
procedure, you will save time and allow the reviewers to complete the work more expeditiously.
Steps in the Permit Process
1. Counter Complete. Your application has been accepted as counter complete. This means all of the required
documents, as indicated on your Pre -Application Checklist have been submitted or have been approved for deferred
submittal. This does not prevent technical staff from requesting additional information as a result of their technical review.
2. Quality Check. The next step in the process is a quality check to make sure that the application is reviewable and free
from substantive flaws that would prevent technical staff from completing the technical review once it is started. When
this step is complete, your application will be routed to the appropriate staff and remain in their review queue until it
comes up for review.
3. Technical Compliance. Once an application is administratively complete, it is routed to technical staff for compliance
review. Depending on the type of project, technical staff may include multiple reviewers. You should be contacted by
phone, fax, email, or mail by your TARGET DATE once the initial technical compliance review is complete.
4. Permit Issuance. When the technical compliance review of the application is complete, including any subsequent re -
submittals, each reviewer will approve their section of the application and route it to the Permit Center. When all sections
of the application are received, a Permit Specialist will process the application and contact the person specified on your
application for permit pick-up. Information regarding fees and pre -construction meetings (if required) will be provided by
the Permit Specialist at that time.
WHITE -APPLICANT PINK - BUILDING FILE REV 9/07
ic4
to- ,�
•
•.1!.. • • • .
F....
cou._+(5
eR_AJK6"/60\1
vco E)y
-
6cti-ciA`
7411t—
recess area on both sides of the profile. The finger
recess shall begin within a distance of 3/4 inch (19
mm) measured vertically from the tallest portion of
the profile and achieve a depth of at least 5/16 inch (8
mm) within 7/8 inch (22 mm) below the widest por-
tion of the profile. This required depth shall con-
tinue for at least 3/8 inch (10 mm) to a level that is not
less than 13/4 inches (45 mm) below the tallest por-
tion of the profile. The minimum width of the hand-
rail above the recess shall be 144 inches (32 mm) to
a maximum of 23/4 inches (70 mm). Edges shall
have a minimum radius of 0.01 inch (0.25 mm).
R311.5.7 Illumination. All stairs shall be provided with
illumination in accordance with Section R303.6.
R311.5.8 Special stairways. Spiral stairways and bulkhead
enclosure stairways shall comply with all requirements of
Section R311.5 except as specified below.
R311.5.8.1 Spiral stairways. Spiral stairways are per-
mitted, provided the minimum width shall be 26 inches
(660 mm) with each tread having a 71/2 -inches (190 mm)
minimum tread depth at 12 inches from the narrower
edge. All treads shall be identical, and the rise shall be no
more than 91/2 inches (241 mm). A minimum headroom
of 6 feet 6 inches (1982 mm) shall be provided.
R311.5.8.2 Bulkhead enclosure stairways. Stairways
serving bulkhead enclosures, not part of the required
building egress, providing access from the outside grade
level to the basement shall be exempt from the require-
ments of Sections R311.4.3 and R311.5 where the maxi-
mum height from the basement finished floor level to
grade adjacent to the stairway does not exceed 8 feet
(2438 mm), and the grade level opening to the stairway is
covered by a bulkhead enclosure with hinged doors or
other approved means.
R311.6 Ramps.
R311.6.1 Maximum slope. Ramps shall have a maximum
slope of one unit vertical in twelve units horizontal (8.3 -per-
cent slope).
Exception: Where it is technically infeasible to comply
because of site constraints, ramps may have a maximum
slope of one unit vertical in eight horizontal (12.5 percent
slope).
R311.6.2 Landings required. A minimum 3 -foot -by -3 -foot
(914 mm by 914 mm) landing shall be provided:
1. At the top and bottom of ramps.
2. Where doors open onto ramps.
3. Where ramps change direction.
R311.6.3 Handrails required. Handrails shall be provided
on at least one side of all ramps exceeding a slope of one unit
vertical in 12 units horizontal (8.33 -percent slope).
R311.6.3.1 Height. Handrail height, measured above
the finished surface of the ramp slope, shall be not less
than 34 inches (864 mm) and not more than 38 inches
(965 mm).
BUILDING PLANNING
R311.6.3.2 Handrail grip size. Handrails on ramps
shall comply with Section R311.5.6.3.
R311.6.3.3 Continuity. Handrails where required on
ramps shall be continuous for the full length of the ramp.
Handrail ends shall be returned or shall terminate in
newel posts or safety terminals. Handrails adjacent to a
wall shall have a space of not less than 1.5 inches (38
mm) between the wall and the handrails.
SECTION R312
GUARDS
R312.1 Guards. Porches, balconies, ramps or raised floor sur-
faces located more than 30 inches (762 mm) above the floor or
grade below shall have guards not less than 36 inches (914 mm)
in height. Open sides of stairs with a total rise of more than 30
inches (762 mm) above the floor or grade below shall have
guards not less than 34 inches (864 mm) in height measured
vertically from the nosing of the treads.
Porches and decks which are enclosed with insect screening
shall be equipped with guards where the walking surface is
located more than 30 inches (762 mm) above the floor or grade
below.
R312.2 Guard opening limitations. Required guards on open
sides of stairways, raised floor areas, balconies and porches
shall have intermediate rails or ornamental closures which do
not allow passage of a sphere 4 inches (102mm) or more in
diameter.
Exceptions:
1. The triangular openings formed by the riser, tread and
bottom rail of a guard at the open side of a stairway are
permitted to be of such a size that a sphere 6 inches
(152 mm) cannot pass through.
2. Openings for required guards on the sides of stair
treads shall not allow a sphere 4 3/8 inches (107 mm) to
pass through.
SECTION R313
SMOKE ALARMS
R313.1 Smoke detection and notification. All smoke alarms
shall be listed in accordance with UL 217 and installed in
accordance with the provisions of this code and the household
fire warning equipment provisions of NFPA 72.
Household fire alarm systems installed in accordance with
NFPA 72 that include smoke alarms, or a combination of
smoke detector and audible notification device installed as
required by this section for smoke alarms, shall be permitted.
The household fire alarm system shall provide the same level of
smoke detection and alarm as required by this section for
smoke alarms in the event the fire alarm panel is removed or the
system is not connected to a central station.
R313.2 Location. Smoke alarms shall be installed in the fol-
lowing locations:
1. In each sleeping room.
2006 INTERNATIONAL RESIDENTIAL CODE° 55
a)(6, ?0�1�, L,,�I l s (e.^
I I )(9 ()Lk? % r.ec.kci P(yVooc\ ,
ReCA 1, e
PC.s a -
Z)46 rup,\
Vitu.SF S t &-`4-
A
bz
AI u Hci i rcC!
/31
vg -
1
Cover
rf
It"
PROVIDE DIAGRAMS AND
ENGINEERING LAYOUTS FOR
ROOF TRUSSES, BEAMS AND
FLOOR SYSTEMS PRIOR TO FRAMING
INSPECTIONS
CITY COPY
THIS BUILDING SUBJECT
TO FIELD INSPECTION CORRECTIONS
REVIEWED Frill ODE COMPLIANCE
SPOKANE V .1 BUILDING DIVISION