2007, 10-25 Permit App: 07004234 AdditionProject Number: 07004234 Inv: 1 Application Date: 10/25/2007 Page 1 of 2
THIS IS NOT A PERMIT
Penalties will be assessed for commencing work without a permit
Proiect Information:
Permit Use: ADDITION TO EXISTING HOME Contact: HOMES APPEAL INC
Address: PO BOX 966
C - S - Z: LIBERTY LAKE WA 99019
Setbacks: Front Left: Right: Rear: Phone: (509) 220-2673
Group Name:
Site Information: Project Name:
Plat Key: 001393 Name: KOKOMO TOWNSITE (FEES) District: Sout
Parcel Number: 45283.5033 Block: Lot:
SiteAddress: 11221 E 31ST AVE Owner: Name: BACKUS, B A & C L
Address: 11221 E 31ST AVE
Location:: CSV SPOKANE VALLEY, WA 99206-71
Zoning: UR -3.5 Urban Residential 3.5
Water District: 007 MODEL Hold: ❑
Area: 10,833 Sq Ft Width: 0 Depth: 0 Right Of Way (ft): 0
Nbr of Bldgs: 0 Nbr of Dwellings: 1
Review Information:
Review
Building Plan Review Released Bir:
Originally Released: 10/24/20077 By: tmelbourn
Landuse/Zoning/HE Conditions f Released $y,
Originally Released: 10/24/2007 By: MBASINGE
Permits:
Operator: jmm Printed By: jmm Print Date: 10/25/2007
Project Number: 07004234 Inv: i Application Date: 10/25/2007 Page 2 of 2
THIS IS NOT A PERMIT
Penalties will be assessed for commencing work without a permit
Contractor: HOMES APPEAL INC
Address: PO BOX 966
LIBERTY LAKE WA 99019
Description Grp Type Notes
1 &2 FAMILY R-3 VB
RES ADD R-3 VB ADDITION
Item Description
RESIDENTIAL PERMIT FEE
WSBC SURCHARGE
SF PLNS RVW < 7999 SQ FT
Building Permit
Firm: HOMES APPEAL INC
Phone: (509) 220-2653
This Application:
S(l Ft Valuation
822 $75,097.92
667 $60,937.12
Totals: 1,489 $136,035.04
Units
Unit Desc
1
SELECT
1
SELECT
1
SELECT
Total Project:
So Ft Valuation
822 $75,097.92
667 $60,937.12
1,489 $136,035.04
Fee Amount
$1,200.95
$4.50
$480.38
Permit Total Fees: $1,685.83
Notes
Issued Home Occupation Affidavit of Exemption 10/19/2007 - Bryce Backus, 'Backus Machining &
Fabrication" Approved by Director. (mjp)
Payment Summary ,..a.:t ..., ,. � :._ .. '=MW �.
Permit Type Fee Amount Invoice Amount Amount Paid Amount Owing
Building Permit $1,685.83 $1,685.83 $0.00 $1,685.83
$1,685.83 $1,685.83 $0.00 $1,685.83
Disclaimer:
Submittal of this application certifies the owner (or person(s) authorized by the owner) has both examined and finds the information
contained within to be true and correct, and agrees that all provisions of laws and/or regulations governing this type of work will be
complied with. Subsequent issuance of a permit shall not be construed to be a permit for, or an approval of, any violation of any of
the provisions of the code or of any other state or local laws or ordinances.
Signature:
Operator: jmm Printed By: jmm Print Date: 10/25/2007
Permit Center EIVED BY
�'rrOFERMIT NUMBER:
11703 E Sprague Ave,A�� SPOKANE VALLEY �1 ¢�
Spokane Valley, WA 6 PERMIT FEE:
IL
3y 0 (509)688-0036 FAX: (509)68�Di�3 F� 226� i
Community Development www.spokanevalley.org T CENTER
Residential Construction ction ❑Accessory Bldg
Permit Application Addition/Remodel ❑ Deck
Other:
SITE ADDRESS: Age? I -- 3 / STfYiE 4!;!� a// 61499�i6
ASSESSORS PARCEL NO: Z152-'3• -Q 3.3 LEGAL DESCRIPTION:
Building Owner:
Name: U�
Address: as s j �Ur
City: State: Zip:�
[Phone:Fa,-Olt
Contact Person
Name:-1:9e-
Phone:
ame:
Phone: edat-
Contractor:
DIMENSIONS:
Name:1,6
TQTA2 HABITABLE SPACE:
Address:
9
City:
E State:l✓A Zip
Phone: a
l
Contractor Li c
Exp Date:
911 iTl-&43 / O
City Business Lic. No:
NO
Describe the scope of work in detail: Cost of Project: $ 43G��
Proposed Use: �a��✓,'�a,,,,r-is�,,cc
**************The foll ing MUST be complete: write N/A if notapplicable)**********************
HEIGHT TO? PEAK:
DIMENSIONS:
# OF STORIES: /
TQTA2 HABITABLE SPACE:
MAIN FLOOR TO SQ.
2 Nu FLOOR SQ. FTG:
UNFIN BASEMENT SQ. FTG:
IMPERVIOUS SURFACE
FTG: 82-2
NO
^e
AREA: ^4b
FINISHED BASEMENT
GARAGE SQ. FTG:
DECK/COV. PATIO SQ. FTG:
30% SLOPES ON
SQ. FTG:
66, 7
1
1 PROPERTY: A00-
# OF BEDROOMS:
CONSTRUCTION TYPE:
HEAT SOUR F -
SEWER OR SEPTIC?
� /E fir.' Z
The permitee verifies, acknowledges and agrees by.,th.einignature that: 1) If this permit is for construction of or on a dwelling, the
dwelling is/will be served by potable water. 2) Ownership of this City of Spokane Valley Permit inure to the property owner. 3) The
signatory is the property owner or has permission to represent the property owner in this transaction. 4) All construction is to be done
in full compliance with the City of Spokane Valley Development Code. Referenced codes are available for review at the City of
Spokane Valley Permit Center. 5) This City of Spokane Valley Permit is not a permit or approval for any violation of federal, state or
local laws, codes or ordinances. 6) Plans or additional information may be required to be submitted, and subsequently approved before
this application can be processed.
/ SIGNATURE: DATE:
Method of Payment:
❑ Cash ❑ Check ❑ Mastercard ❑ VISA
Bankcard #: Expires: VIN#:
Authorized Signature:
REVISED 2/15/07
Site Address: 11221 E 31 ST AVE
Parcel Number: 45283.5033
Zoning: UR -3.5
Fire District: FD 01
Newproject
Project Previous pre -app meeting
Tram s mittal Plan revisions
City of Spokane Valley
Community Development
Department
11703 E. Sprague Ave, Suite B3
Spokane Valley, WA 99206
Phone: 509.688.0036
Water District: MODEL
Applicant: HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2673
e-mail:
Contact: HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2673
e-mail:
Contractor. HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2653
Project ADDITION TO EXISTING HOME
Description:
Transmittal Date:
Monday, October 22, 2007
Project Number. 07004234
Owner. BACKUS, B A & C L
11221 E 31 STAVE
SPOKANE VALLEY, WA 99206-713
e-mail.-
Occupant:
-mail.Occupant:
e-mail:
Arch / Engineer.
e-mail:
R[EcEPgDD�,'
OCT ` 200?
10D U � �i
Please send all plan review and project comments via e-mail to the
highlighted individuals.
Building
Landuse
Engineer
Utilities
Health
Fire Dist
Assessor
APPLICATION
1
CONSTRUCTION PLAN
\
SITE PLA
TARGET DATE SHEE
1
Please send all plan review and project comments via e-mail to the
highlighted individuals.
Site Address: 11221 E 31 ST AVE
Parcel Number. 45283.5033
Zoning: UR -3.5
Fire District: FD 01
Project
Transmittal
City of Spokane Valley
Community Development
Department
11703 E. Sprague Ave, Suite B3
Spokane Valley, WA 99206
Phone: 509.688.0036
Water District: MODEL
Applicant: HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2673
e-mail:
Contact: HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2673
e-mail:
Contractor. HOMES APPEAL INC
PO BOX 966
LIBERTY LAKE WA 99019
(509) 220-2653
Project ADDITION TO EXISTING HOME
Description:
New project
Previous pre -app meeting E]
Plan revisions ❑
Transmittal Date:
Monday, October 22, 2007
Project Number: 07004234
Owner: BACKUS, B A & C L
11221 E 31 ST AVE
SPOKANE VALLEY, WA 99206-713
e-mail:
Occupant:
e-mail:
Arch / Engineer:
e-mail:
VC Pk)
Please send all plan review and project comments via e-mail to the
highlighted individuals.
Building
Landuse
Engineer
Utilities
Health
Fire Dist
Assessor
APPLICATION
CONSTRUCTION PLAN
\
SITE PLA
\
TARGET DATE SHEE
VC Pk)
Please send all plan review and project comments via e-mail to the
highlighted individuals.
3333 50
67 Lo3
•
/'o
iG s5 //,=/ ef -3 / S-rlgl
5'.2-e3.6033
.s-��e7
/l.-7er
4. ,
'83 3.3 _
APPROVED BY ilyli-
"-
mo
W
0
3o -
2006 rRC `
Ten Things You Must KnowY , zv 5F L, 6--* `P
1. R105.2 "Work Exempt From Permit" — Spokane County will maintain the 200
sq/ft threshold for one-story detached accessory structures used as tool and storage
sheds, or similar uses.
2. Table 8301.5 "Live Loads" — Attic storage is clarified in the footnotes of this table.
An example: If two or more adjacent trusses with the same web configuration
contain a rectangle 42 inches or greater in height by 24 inches or greater in width,
located within the plane of the truss, a 20 psi 'v j must beappl-to the design
of the bottom chord co ponents affected.
3. R319.L5 "Exposed Glued -laminated Timbers" — Those portions of glu-lam
timbers that form structural support -of buildings/ structures and are exposed to the
weather, and not protected by a roof, eave, or similar covering shall be pressure
treated, or naturally durable wood.
4. WAC AMENDMENT 8327 "Protection Against Radon" — State adoption of
IRC Appendix F for mitigation measures applicable for buildings constructed in
"High Radon Potential Counties" (Spokane county). Appendix F, Section AF101.1
(WAC Amendment) no longer permits un -vented (conditioned) crawl spaces.
Appendix F further requires passive radon vents to be installed in vented crawl
spaces. WAC Amends R408.2, permitting 1:300 sq/ft ratios for ventilating crawl
spaces.
5. R406.1 "Foundation Damp -proofing" — Language change removes "habitable or
usable spaces", and replaces with "foundation walls that retain earth and enclose
interior sl2aces and floors below grade..." effectively requiting damp -proofing of
crawl space foundation walls. R406.2 similar for water -proofing.
6. R613.2 "Window Sills" — New section requires protection similar to guardrails (4"
dia. sphere) for operable portions of windows less than 24 inches above the finished
floor, and greater than 72 inches above the adjacent exterior grade or surface below.
7. R702.4.2 Tile Backer Board — Requires cement, fiber -cement, or glass mat gypsum
backers for tile installation in tub and shower areas and wall panels in shower areas.
S. R703.2 and Table R703.4 "Water -resistive Barrier" — Felt, or other approved
barriers (house wrap) are now required over all exterior wall studs or sheathing, and
there is no longer an exception for not requiring such felt/barriers under panel
sidings with shiplap joints.
9. R703.8 "Flashing" — The provisions for self -flashing windows (use if the window's
mounting flange) has been eliminated. Approved corrosion -resistive flashings must
be applied shingle fashion at all door/window openings. R613.1 requires window
manufacturers to provide installation/flashing instructions for each window.
10. Washington State Energy Code Section 505.3 "Outdoor Lighting" —
Luminaries providing outdoor lighting and permanently to residential buildings must
be high efficiency (compact b fluorescent) motion�sensobs rswith integral photo pin style base. ptin ensorsllows
incandescent fixtures controlledy
ay'
Miiii ��is
MEIN N
A/'
Minimum depth for frost protection in the City of
Spokane Valley is 24 inches measured from the bottom
of the footing to finish grade. Grade slope away from
building a minimum 6 inches in first 10 feet.
Radon Mitigation System Required
With 6 mil Vapor Barrier
o,",14 4-1
"Sf 6"✓e Gds//
Under Floor Ventilation
1 Sq Ft per every ISO Sq Ft of under
floor space area. t ventilating opening shall,
be within 3 feet of each corner. Openings
shall be covered with approved material.
PROVIDE SOLID :BLIOG� COLUNMIS
BFJ1FiINt, a1MAl1S ��
PROVIDE DOUBLE JOKIS OM OLDER ALL WALLS
PARALL�LTO SPNI{LN;O
UNDER ALL HIP AND
TkMSUX0.
PROVIDE SHEAR CONNECTION FROM INTERIOR
SMEAR WALLS TO TRUSSES OR JOISTS
Attic Ventilation
1 Sq Ft per every 300 Sq Ft of space
ventilated with at least 50% in the u
portion of roof area. /
r—
-.LL FOOTINGS MUST BE CONTINUOUS'
CONCRETE TO COMPLYTO IRC TABLE 404.1.1(1) AVieov�
FQ,UNDATIONMALLS - 3000 # PSI
SLABS, GARAGES, CARPORTS
& PORCHES - 3500 # PSI
i Sq Ft per every 150 Sq Ft of under
floor space area. 1 ventilating opening shall
be within 3 feet of each comer. Openings
shall be covered with approved material.
lr 11 V 1.3. t – Attic msutatlon certincatlon requirea as10
R – value or coverage. Markers, attached to trusses or
rafters, required for every 300 sf of attic space with 1
inch high numbers for installed thickness of insulation.
CEILING: %" GWB if perpendicular to rafters or
trusses 24" o.c. and no water based texture used—
otherwise 5/8" GWB.
Under
by 18"
Atl-j �SJ32
ozzdF SW �h►r�rL�
OL%w /rte`'
OAr-L�
1/8" GAP
BE -IwVEEN SHEATHING
M•N r s F- e4T
30# felt for ice
S}Ir rJG �� T o
G
dam rOteCtlOn.
P
IS FFL-A
10A
accessible
//
Clearance 18" °Z '
'91 D17--kj-416
Damp -Proofing – Required on Foundation Walls - top Anchor Bolts- Minimum '/2" x 10" with 7" concrete
of footing to finished grade of crawl space & basement. embedment at 6' o.c. and 12" from ends of sill plates.
Weather -Resistive Barrier – Required under Siding p -r. . s i L -L- R vti t • & e ^A& i m�k
WSEC TABLE 6-2
PRESCRIPTIVE REQUIREMENTS0•1 FOR GROUP R OCCUPANCY
CLIMATE ZONE 2
* Reference Case
0. Nominal R -values are for wood frame assemblies only or assemblies built in accordance with
Section 601.1.
1. Minimum requirements for each option listed. For example, if a proposed design has a glazing ratio
to the conditioned floor area of 13%, it shall comply with all of the requirements of the 15% glazing
option (or higher). Proposed designs which cannot meet the specific requirements of a listed option
above may calculate compliance by Chapters 4 or 5 of this Code.
Requirement applies to all ceilings except single rafter or joist vaulted ceilings.
Requirement applicable only to single rafter or joist vaulted ceilings.
4. Below grade walls shall be insulated either on the exterior to a minimum level of R-10, or on the
interior to the same level as walls above grade. Exterior insulation installed on below grade walls
shall be a water resistant material, manufactured for its intended use, and installed according to the
manufacturer's specifications. See Section 602.2.
5. Floors over crawl spaces or exposed to ambient air conditions.
6. Required slab perimeter insulation shall be a water resistant material, manufactured for its intended
use, and installed according to manufacturer's specifications. See Section 602.4.
7. Int. denotes standard framing 16 inches on center with headers insulated with a minimum of R-5
insulation.
COOPERATIVE EXTENSION
WSEC Builder's Field Guide 5th Edition WASHINGTONSTATE UNIVERSITY 1-7
15 ENERGY PROGRAM
Glazing
Glazing U-FactorDoor'
Wall 12
Wall?
Wall?
Slab'
Option
Area '°:
U-
Ceiling2
Vaulted
Ceiling
Above
int
Below
ext
Below
Floors
on
% of floor
Factor
Grade
Grade
Vertical
Overhead"
Grade
Grade
I.
10%
0.40
0.58
0.20
R-38
R-30
R-21
R-21
R-12
R-30
R-10
int'
II.
150/.
0.40
0.58
0.20
R-38
R-30
R-19+
R-21
R-12
R-30
R-10
R-58
III.
17%
0.37
0.58
0.20
R-38
R-30
R-19+
R-21
R-12
R-30
R-10
R-58
IV.
25%
0.35
0.58
0.20
R-38 /
R-30 /
R-21
R-15
R-12
R-30 /
R-10/
Group R-1
U=0.031
U=0.034
int' /
U=0.029
F=0.54
Occupancy
U=0.054
Only
V.
Unlimited
0.35
0.58
0.20
R-38
R-30
R-21
R-21
R-12
R-30
R-10
Group R-3
int'
Occupancy
Only
VI.
Unlimited
0.32
0.58
0.20
R-38 /
R-30 /
R-21
R-15
R-12
R-30 /
R-10 /
Group R-1
U=0.031
U=0.034
int' /
U=0.029
F=0.54
Occupancy
U=0.054
Only
* Reference Case
0. Nominal R -values are for wood frame assemblies only or assemblies built in accordance with
Section 601.1.
1. Minimum requirements for each option listed. For example, if a proposed design has a glazing ratio
to the conditioned floor area of 13%, it shall comply with all of the requirements of the 15% glazing
option (or higher). Proposed designs which cannot meet the specific requirements of a listed option
above may calculate compliance by Chapters 4 or 5 of this Code.
Requirement applies to all ceilings except single rafter or joist vaulted ceilings.
Requirement applicable only to single rafter or joist vaulted ceilings.
4. Below grade walls shall be insulated either on the exterior to a minimum level of R-10, or on the
interior to the same level as walls above grade. Exterior insulation installed on below grade walls
shall be a water resistant material, manufactured for its intended use, and installed according to the
manufacturer's specifications. See Section 602.2.
5. Floors over crawl spaces or exposed to ambient air conditions.
6. Required slab perimeter insulation shall be a water resistant material, manufactured for its intended
use, and installed according to manufacturer's specifications. See Section 602.4.
7. Int. denotes standard framing 16 inches on center with headers insulated with a minimum of R-5
insulation.
COOPERATIVE EXTENSION
WSEC Builder's Field Guide 5th Edition WASHINGTONSTATE UNIVERSITY 1-7
15 ENERGY PROGRAM
R602.10.4 Brace Wall Panel min. 48 in.— 96 in.
R602.10.6.1 Alternate Brace Wall Panel min.28in.-42in.
R602.10.6.2 Alternate Brace Wall Panel min.l6in.-24in.
Engineered Shear Wall Bracing
PROTECTION AND OPE'"G BETW W
DWELLING AND PRIVATE GARA .SHALL VE:
1) MATERIALS APPROVED FOR ONE HOUR FIRE RESISTI
CONSTRUCTION ON THE GARAGE SIDE:
❑ 5/8" TYPE "X" GYP BOARD (HABITABLE SPACE ABOVE) OR
❑ 1/2" GYP BOARD (RESIDFNCEiATTIC. FLOOR/CEILIFJG)
2) OPENING ; BEi WEEN GARAGE AND RESIDENCE SHALL BE
EQUIPPED WITH SOLID WOOD DOOR. SOLID OR HONEYCOMB CORE ��
STEEL DOORS NOT LESS THAN 1 3/8", OR 20 MINUTE FIRE RATED
DOORS. IF
EMERGENCY EGRESS REp1AREMENTS
FROM SIEEPNO ROOMS
1) NET CLEAR OPENNIG: 5.11S uARE FEET
OOR OPEN" {MAX 44-) 5 0 84
GRADEfL
2) NET CLEAR pyI
OPENING
NES
HES
1
3) NET CLEAR OPENINGYNOTH 20 20 i
OVE Fl00i��
41 Max FINISHED SILL MWIT
5iIML1115LNCYESCAPE &RESCUEOPENI
HALLBE
WITHOUT
OPE RAiZONAE FROM THE INSOEOF THE RO
IHS uSE ;i, PaYS OR TOOLS
WHEN INTERIOR ALTERATIONS, REPAIRS OR /
REQUIRING A PERMIT OCCUR, OR WHEN ONE
SLEEPING ROJMS ARE ADDED OR CREATED I<
DWELLINGS. THE DWELLING UNIT SHALL BE
WITH SMOKE ALARMS LOCATED AS REQUIRES
DWELLINGS.
OPMOKE ALARMS SHALL BE INT
., AND HARD WIRED IN
MANNER THAT THE ACTIVATION'
ALAhM WILL ACTIVATE ALL A
(BEDROOMS, AREAS APPROI
BEDROOMS, VAULTED CE
WITH RISE OF 24" & ON EACH FLOOI
011
TIONS
MORE
STING
A
NE
LING
Egress windows gpenable
5.7 sq. ;ft. - 44" sill
E1A Obi
s s��a`,N
`J'67 .f ,4v ). ,N
EXHAUST -'FAN
1100'0FM kitch6n
50 CFM bathroo-Alk
& laundry VE WtA—NDING required on both sides of exit doors with min. size of
0'4 3 ft. measured in direction of travel by 3 ft. or width of door if
greater, and not lower than 1 '/z in. below threshold. Landing
required at other exterior doors is a minimum size of 3 ft travel
distance by width of door, and not lower than 7'/4 in. below
threshold provided the door does not swing over the landing.
2cr-
0 1 - Wy
0
6641 I 1 1t
6--fA' — -1 a ..
,F� /50.411-/5101q I
270
x
I � g
q✓ E\\
,20-5 je•
II Gc8 s•ZL-0 6y vt'uao/t
AH
Z
v:
V
0'5"1
Y
W"
lie. Y► , E A ,
4w
• J �1 J� J �' ►Ij//'
It
PO
y, I fSJI nl Jt
4 .
r,,
•
"4t A
y. . 44}'
...-r • '� .. `-r"�,,aY'�r ..ter �� J�K?' k%;.�a"'y' f ,.'1 � f
Y -.y five h do 4 .rK 4 Y
. r.
.y..:, y w. � •d.r}.., M.} ! � '�"`JT4 �J"✓��d S �^' �n`ir .'�. y_ t" `. '.° y .
,�„ rw -a .gar v,9 �� '< 7 �b �''r p Y .J��,jMr� � �r���,� "`� � � z '"�•.'r^� .4 � 3 a _ ... - � -:� ... _
wal,8ht k: .'"� .� ; . Eh� ..:°c•"^°?6'+urw-�.�. r a •::i •k`� ,y.f
�p„_ r+•yr».vs. r �wwau, ..'-rte ..r- ~""a . - � 4 w., -•.:raves %z +�"
t it -wt
\ R
s, t
M � R SyS_ f _ , 1•J= '�'
tv
T M
y { .!
v
k
V
k
PROVIDE DIAGRAMS AND
ENGINEERING LAYOUTS FOR
ROOF TRUSSES, BEAMS AND
FLOOR SYSTEMS PRIOR TO FRAMING
INSPECTIONS
CITY COPY
THIS BUILDING SUBJECT
TO FIELD INSPECTION CORRECTIONS
REVIEWED FOR CODE COMPLIANCE
SPOKANE VALLEY B ILDINC DIVISION
'T9Gt 1 o
Spokane
Valley
For City Use Only
PLUS Project Number '7- 41234
Project Address (( ZZ I
11703 E Sprague Ave Suite B-3 ♦ Spokane Valley WA 99206
509.688.0036 ♦ Fax: 509.688.0037 ♦ permitcenter@spokanevalley.org
As part of our on-going commitment to customer service during the review process of your project
application, we are providing you with a TARGET DATE for the initial technical application review. If for
any reason we cannot meet this date, we will contact you with a revised target date.
Your application review TARGET DATE is
The TARGET DATE is the date we estimate your project application will have had its initial technical
review. It is not the date for approval or permit issuance.
Tips for a Smoother Project Application Review
➢ Submit complete, accurate plans and documents.
Extra time may be required for re -submittals as project application reviewers work on multiple applications and it
may be several days before they can look at your new or revised information.
➢ Designate a specific contact person to communicate with the City.
While the person designated as the applicant's contact person with the City can be changed, one individual with the
expertise for dealing with reviewer comments would be the best choice for the entire review process.
➢ Call staff regarding the status of your project only after the target date shown at the top of the page.
Although you should be contacted on or by the target date, please feel free to contact us if you haven't heard from us
by your target date. Staff may contact you before the target date if the initial review is complete. By following this
procedure, you will save time and allow the reviewers to complete the work more expeditiously.
Steps in the Permit Process
1. Counter Complete. Your application has been accepted as counter complete. This means all of the required
documents, as indicated on your Pre -Application Checklist have been submitted or have been approved for deferred
submittal. This does not prevent technical staff from requesting additional information as a result of their technical review.
2. Quality Check. The next step in the process is a quality check to make sure that the application is reviewable and free
from substantive flaws that would prevent technical staff from completing the technical review once it is started. When
this step is complete, your application will be routed to the appropriate staff and remain in their review queue until it
comes up for review.
3. Technical Compliance. Once an application is administratively complete, it is routed to technical staff for compliance
review. Depending on the type of project, technical staff may include multiple reviewers. You should be contacted by
phone, fax, email, or mail by your TARGET DATE once the initial technical compliance review is complete.
4. Permit Issuance. When the technical compliance review of the application is complete, including any subsequent re -
submittals, each reviewer will approve their section of the application and route it to the Permit Center. When all sections
of the application are received, a Permit Specialist will process the application and contact the person specified on your
application for permit pick-up. Information regarding fees and pre -construction meetings (if required) will be provided by
the Permit Specialist at that time.
WHITE -APPLICANT PINK - BUILDING FILE REV 9/07